Masking tape is very common in daily applications. It is suitable for high-temperature coating protection on the surface of automobiles, iron or plastic equipment, and furniture. It is also suitable for electronics, electrical appliances, varistors, circuit boards, etc. It is made of masking paper and pressure-sensitive adhesive as the main raw materials. It has the characteristics of high adhesion, soft stickiness and no residue when tearing.

Let’s talk about 7 storage methods of masking tape
1. The tape should be stored in a warehouse to protect it from the sun and rain and keep it dry and tidy.
2. The tape should be placed in a roll and cannot be folded. It should be rotated every few days during storage.
3. When loading and unloading the conveyor belt, it is best to use a crane and use cables with beams to lift it smoothly to avoid damaging the edges of the conveyor belt. Do not overload and unload as this may cause the rolling and swing sleeves to loosen.
4. Types and specifications should be used according to needs and specific conditions, and selected reasonably. Such as: high viscosity, medium viscosity, high temperature, medium temperature
5. Do not bend or squirm the tape to keep the roller sensitive and the tension should be appropriate.
6. Cleanliness is the basic condition for the good operation of the belt. The outer material of the tape will affect the viscosity, eccentricity, tension difference, and even breakage of the tape.
7. If early damage to the belt is found during use, the cause should be found in time.
3 reasons why masking tape curls up
1. Glue viscosity is not enough
Solution: Choose a high-viscosity material.
2. The labeling machine has insufficient pressure.
Solution: Glue viscosity problem, or choose materials with appropriate glue viscosity.
3. Label surface material
It must be considered whether the marked object is a plane or a curved surface, a large diameter or a small diameter, etc. These factors are related to the choice of materials. You can choose soft materials such as PE and PVC, while you can choose hard materials such as PET, BOPP and PS materials with high hardness.